Guide for the Joining of Wrought Nickel-Based Alloys Reprinted, Incorporates Errata: October 2003
标准号:AWS G2.1M/G2.1-2002
标准名称: 锻造镍合金指南 重新印刷 整合修正:2003年10月
英文名称:Guide for the Joining of Wrought Nickel-Based Alloys Reprinted, Incorporates Errata: October 2003
标准类型:国外标准
标准状态:现行
中国标准分类号(CCS):H40
国际标准分类号(ICS):77.140.01
替代以下标准:AWS G2.1M/G2.1-2012
ANSI/AWS G2.1M/G 2.1-2012 现行
锻造镍基合金指南
ANSI/AWS B2.1/B 2.1M-2013 现行
焊接工艺和性能认证用规范
ANSI/AWS B2.1-1-004-2002 现行
在焊接条件下、有或没有垫板、10到18规格的碳钢(M1,组1)的气体保护金属极电弧焊
ANSI/AWS B2.1-8-013-2002 现行
标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的奥氏体不锈钢(M-8/P-8)的保护金属电弧焊
ANSI/AWS B2.1-1-003-2002 现行
在焊接条件下、有或没有垫板、10到18规格的镀锌钢的气体保护金属极电弧焊
ANSI/AWS B2.1-8-005-2002 现行
在焊接条件下、有或没有垫板、10到18规格的奥氏体不锈钢(M-8或P-8)的气体保护金属极电弧焊
ANSI/AWS B2.1-1-012-2002 现行
标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的碳钢(M1,组1)的保护金属焊条电弧焊
ANSI/AWS B2.1-8-009-2002 现行
在焊接条件下、有或没有垫板、10到18规格的不锈钢(M-8或P-8)的钨电极惰性气体保护焊
ANSI/AWS B2.1-1-008-2002 现行
在焊接条件下、有或没有垫板、10到18规格的碳钢(M1,组1)的钨电极惰性气体保护焊
ANSI/AWS B2.1-1-011-2002 现行
标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的镀锌钢的保护金属焊条电弧焊