System of cone tolerances and cone fits for conical workpieces from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; system of cone tolerances
标准号:DIN 7178-1-1974
标准名称: 锥形工件C=1:3至1:500及长度6至630mm的圆锥公差与配合体系.圆锥公差体系
英文名称:System of cone tolerances and cone fits for conical workpieces from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; system of cone tolerances
标准类型:国外标准
标准状态:现行
中国标准分类号(CCS):J04
国际标准分类号(ICS):17.040.10
DIN 7178-1 Bb.1-1973 现行
锥形工件C=1:3至1:500及长度6至630mm的圆锥公差与配合体系.内外圆锥的检验方法
DIN 7178-2-1986 现行
锥度C=1:3至1:500及长度6至630mm的锥形工件的圆锥公差与配合体系.圆锥配合体系
DIN 7178-4-1986 现行
锥度C=1:3至1:500及长度6至630mm的锥形工件的圆锥公差与配合体系.轴向位移
DIN 7178-3-1986 现行
锥度C=1:3至1=500及长度6至630mm的锥形工件的圆锥公差与配合体系.圆锥偏差对圆锥配合的影响
DIN 7178-5-1976 现行
锥度C=1:3至1:500及长度为6至630mm的锥形工件的圆锥公差与配合体系.德语、英语、法语、意大利语、俄语及西班牙语的词汇
DIN 1996-1-1974 现行
筑路和相关用途沥青材料的检验.关于试验评价的总则、概述和说明
DIN 1367-1-1974 现行
第1部分:封口镀锌钢丝
DIN 3970-1-1974 现行
正齿轮检验用标准齿轮.第1部分:齿轮坯和啮合体系
DIN 16903-1-1974 现行
塑料模塑件用开口螺母镶件
DIN 2510-1-1974 现行
带减缩刀柄的螺栓连接件.第1部分:综述.应用范围和安装示例